This is a 2.13 inch e-paper screen ESP32 module, 250x122 resolution, SPI interface, supports 1.5s fast refresh, 3s full refresh, 0.4s partial refresh, and the display is capable to display images with black and white content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-paper display GDEY0213B74 is perfect for low power devices powered by solar or batteries.
ESP32-L(C02) development kit is only for users to develop and drive electronic paper display. The application of WiFi, Bluetooth and other functions requires users to develop on their own according to the project.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
1) 2.13 inch 250x122 Raspberry Pi EPD Electronic Epaper price tag, GDEY0213B74 * 2pc
2) FPC Connector * 2pc
3) Driving board ESP32-L * 1pc
4) Connector board DESPI-C02 * 1pc
5) USB port cable * 1pc
PART NUMBER |
GDEY0213B74 |
||
TYPE |
Dot Matrix |
CONNECTOR | 24 Pin FPC |
SIZE |
2.13 inch |
MAX GRAYSCALE | 4 |
IC |
SSD1680Z |
COLOR | Black,White |
RESOLUTION |
250x122 |
INTERFACE | SPI |
OUTLINE SIZE(mm) |
59.2x29.2x1.0 |
FULL REFRESH(s) | 3 |
ACTIVE SIZE(mm) |
48.55x23.7046 |
FAST REFRESH(s) | 1.5 |
PIXEL PITCH(mm) |
0.1943x0.1942 |
PARTIAL REFRESH TIME(s) | 0.42 |
OPERATING TEMP. |
0℃~50℃ |
POWER CONSUMPTION OF THE REFRESH(mW) | 10.5 |
STORAGE TEMP. |
-25℃~70℃ |
STANDBY POWER CONSUMPTION (mW) | 0.003 |
PART NUMBER | ESP32-L(C02) | ||
PLATFORM | Arduino | OUTSIDE DIMENSION | 70x54mm (ESP32-L) 41x22mm (DESPI-C02) |
POWER INPUT | DC3.3V | OPERATING TEMP. | -20~70℃ |
SAMPLE CODE | Available (please contact sales) | ||
MAIN FUNCTION | Learn to drive E-paper display; Test and evaluate e-paper display; Support secondary development |
||
OTHER FUNCTION | Type-C,LED indicator, Reset button, Font chip, Flash chip, Current detection | ||
● Support 4 Grayscale
● Support 1.5s Fast Refresh
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● It supports partial refresh, the refresh rate is 0.4s/frame
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
Part Number |
Color |
IC | Resolution |
Features |
Refresh Time |
GDEW0213T5D | BW | UC8151D | 212x104 | Partial Refresh, 4 Grayscale | 3s |
GDEW0213I5FD | BW | UC8151C | 212x104 | Flexible, Partial Refresh | 3s |
GDEY0213B74 | BW | SSD1680 | 250x122 | Partial Refresh | 3s |
GDEY0213Z98 | BWR | SSD1680 | 250x122 | Colorful(Red) | 14s |
● GDEY0213B74 Specification
● IC Driver SSD1680 Datasheet
● GDEY0213B74 Picture Production and Bitmap Conversion
● GDEY0213B74 STM32 Sample Code
● GDEY0213B74 ESP32 Sample Code
● GDEY0213B74 ESP8266 Sample Code
● GDEY0213B74 Arduino Sample Code
● ESP32-L(C02) Specification
● DESPI-C02 Specification
● ESP32-L_SCH
● DESPI-C02-SCH
Thank you for your interest in our product. If you need any further assistance or have any other questions, please feel free to contact us. We sincerely invite you to send your inquiries to our email at [buyepaper@good-display.com].