This is a 2.9 inch e-ink screen Raspberry pi display with 296x128 resolution, SPI interface, and the display is capable to display images with black and white content. It supports 3s full refresh, 1.5s fast refresh, and 0.3s partial refresh. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-paper display GDEY029T94 is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
PART NUMBER |
GDEY029T94 |
||
DISPLAY FORMAT |
296x128 |
COLOR | Black, White |
IC | SSD1680 | MAX GRAYSCALE | 4 |
OUTLIN DIMENSION(mm) |
79x36.7x1.2 |
INTERFACE | SPI |
ACTIVE AREA(mm) |
66.896x29.056 |
POWER CONSUMPTION OF THE REFRESH(mW) | 9 |
PIXEL PITCH(mm) | 0.227x0.226 | STANDBY POWER CONSUMPTION (mW) | 0.003 |
SIZE(mm) |
2.9 inch |
FULL REFRESH(s) | 3 |
OPERATING TEMP. |
0℃~50℃ |
FAST REFRESH(s) | 1.5 |
STORAGE TEMP. | -25℃~70℃ | PARTIAL REFRESH TIME(s) | 0.3 |
● Support 4 Grayscale
● Customizable 1.5s Fast Refresh
● Black and white monochrome is easy to read.
● Versatile. Use in portrait or landscape format.
● Bistable. (Will continue to display with no power source)
● Support partial refresh. The partial refresh rate is 0.3s/frame
● Compared with other 2.9 inch electornic paper displays, the power consumption is lower
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP32-L(C02) (WiFi / Bluetooth)
● DESPI-C03 (Rasberry Pi Epaper HAT)