This is a 1.54 inch small e-ink display 4 Grayscale display panel with 6 pins FPC frontlight, 152x152 resolution, SPI interface, and the display is capable to display images with black and white content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-ink modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-ink display GDEW0154T8-FL is perfect for low power devices powered by solar or batteries, and it can be used in dark environment.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
PART NUMBER |
GDEW0154T8-FL |
TYPE |
Dot Matrix |
SIZE |
1.54 inch |
IC |
UC8151C |
RESOLUTION |
152x152 |
ACTIVE SIZE(mm) |
27.51x27.51 |
PIXEL PITCH(mm) |
0.181x0.181 |
OPERATING TEMP. |
0℃~50℃ |
STORAGE TEMP. |
-25℃~70℃ |
CONNECTOR |
24 Pin FPC |
MAX GRAYSCALE |
4 |
COLOR |
Black,White |
INTERFACE |
SPI |
FULL REFRESH(s) |
3 |
PARTIAL REFRESH TIME(s) |
0.3 |
TIME OF FAST REFRESH(s) |
0.82 |
POWER CONSUMPTION OF THE REFRESH(mW) |
26.4 |
STANDBY POWER CONSUMPTION (mW) |
0.0165 |
● Support 4 Grayscale
● Fast refresh (0.82s/frame)
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● With Frontlight. It can be used in dark environment
● It supports partial refresh, the refresh rate is 0.3s/frame
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Development platform available STM32(DESPI-03) / Arduino(DEArduion(C03))/ Raspberry Pi(DESPI-C03) / ESP8266(ESP8266(C03)) / ESP32(ESP32-03)